Oct 24, 2024 PASS Splunk SPLK-1005 EXAM WITH UPDATED DUMPS
SPLK-1005 Questions PDF [2024] Use Valid New dump to Clear Exam
NEW QUESTION # 25
Which of the following is a valid stanza in props. conf?
- A. [host:nyc*]
- B. [host::nyc*]
- C. [sourcetype::linux_secure]
- D. [host=nyc25]
Answer: C
Explanation:
In props.conf, valid stanzas can include source types, hosts, and source specifications. The correct syntax uses colons for specific types, such as source types and hosts, but follows a particular format:
* A. [sourcetype::linux_secure]is the correct answer. This is a valid stanza format for a source type in props.conf. It indicates that the following configurations apply specifically to the linux_secure source type.
* B. [host=nyc25]:Incorrect, the correct format for a host-based stanza uses double colons, not an equal sign.
* C. [host::nyc]:* Incorrect, wildcards are not used in this manner within props.conf.
* D. [host
]:* Incorrect, the correct format requires double colons for host stanzas.
Splunk Documentation References:
* props.conf Specification
NEW QUESTION # 26
When should Splunk Cloud Support be contacted?
- A. When unable to resolve issues or perform problem isolation.
- B. For resizing, license changes, or any purchases.
- C. For all configuration changes.
- D. For scripted input troubleshooting.
Answer: A
Explanation:
Splunk Cloud Support should be contacted when issues arise that cannot be resolved internally or when problem isolation has been unsuccessful.
* C. When unable to resolve issues or perform problem isolationis the correct answer. Splunk Cloud Support is typically involved when internal troubleshooting has been exhausted, and the issue requires expert assistance or deeper investigation. While scripted input troubleshooting might be handled by internal teams, contacting support for unresolved issues is the appropriate step.
Splunk Documentation References:
* When to Contact Splunk Support
NEW QUESTION # 27
Which command can be used to run a 'splunk diag' on both the indexer and the forwarder?
- A. splunk diag -collect all -auth <username>:<password>
- B. splunk diag -collect all -user <username> -password <password>
- C. splunk diag -collect all -uri https://<username>:<password>@<host>:<port>
- D. splunk diag -collect all -server <host>:<port>
Answer: A
NEW QUESTION # 28
Which tool can be used to verify that data is actually being received on the specified port on the indexing server?
- A. traceroute
- B. netstat
- C. ping
- D. tcpdump
Answer: D
NEW QUESTION # 29
Which of the following is correct in regard to configuring a Universal Forwarder as an Intermediate Forwarder?
- A. The configuration changes can be made using CU, directly in configuration files, or via a deployment app.
- B. This can only be turned on using the Settings > Forwarding and Receiving menu in Splunk Web/UI.
- C. It is only possible to make this change directly in configuration files or via a deployment app.
- D. The configuration changes can be made using Splunk Web. CU, directly in configuration files, or via a deployment app.
Answer: C
Explanation:
Configuring a Universal Forwarder (UF) as an Intermediate Forwarder involves making changes to its configuration to allow it to receive data from other forwarders before sending it to indexers.
* D. It is only possible to make this change directly in configuration files or via a deployment app:
This is the correct answer. Configuring a Universal Forwarder as an Intermediate Forwarder is done by editing the configuration files directly (like outputs.conf), or by deploying a pre-configured app via a deployment server. The Splunk Web UI (Management Console) does not provide an interface for configuring a Universal Forwarder as an Intermediate Forwarder.
* A. This can only be turned on using the Settings > Forwarding and Receiving menu in Splunk Web/UI:Incorrect, as this applies to Heavy Forwarders, not Universal Forwarders.
* B. The configuration changes can be made using Splunk Web, CLI, directly in configuration files, or via a deployment app:Incorrect, the Splunk Web UI is not used for configuring Universal Forwarders.
* C. The configuration changes can be made using CLI, directly in configuration files, or via a deployment app:While CLI could be used for certain configurations, the specific Intermediate Forwarder setup is typically done via configuration files or deployment apps.
Splunk Documentation References:
* Universal Forwarder Configuration
* Intermediate Forwarder Configuration
NEW QUESTION # 30
When monitoring directories that contain mixed file types, which setting should be omitted from inputs, conf and instead be overridden in propo.conf?
- A. index
- B. sourcetype
- C. source
- D. host
Answer: B
Explanation:
When monitoring directories containing mixed file types, the sourcetype should typically be overridden in props.conf rather than defined in inputs.conf. This is because sourcetype is meant to classify the type of data being ingested, and when dealing with mixed file types, setting a single sourcetype in inputs.conf would not be effective for accurate data classification. Instead, you can use props.conf to define rules that apply different sourcetypes based on the file path, file name patterns, or other criteria. This allows for more granular and accurate assignment of sourcetypes, ensuring the data is properly parsed and indexed according to its type.
Splunk Cloud Reference:For further clarification, refer to Splunk's official documentation on configuring inputs and props, especially the sections discussing monitoring directories and configuring sourcetypes.
Source:
* Splunk Docs: Monitor files and directories
* Splunk Docs: Configure event line breaking and input settings with props.conf
NEW QUESTION # 31
Which setting in inputs.conf can be used to specify the interval at which the script runs for a scripted input?
- A. cron
- B. schedule
- C. frequency
- D. interval
Answer: D
NEW QUESTION # 32
Which file or folder below is not a required part of a deployment app?
- A. app.conf (in default or local)
- B. props.conf
- C. metadata folder
- D. local.meta
Answer: B
Explanation:
When creating a deployment app in Splunk, certain files and folders are considered essential to ensure proper configuration and operation:
* app.conf (in default or local):This is required as it defines the app's metadata and behaviors.
* local.meta:This file is important for defining access permissions for the app and is often included.
* metadata folder:The metadata folder contains files like local.meta and default.meta and is typically required for defining permissions and other metadata-related settings.
* props.conf:While props.conf is essential for many Splunk apps, it is not mandatory unless you need to define specific data parsing or transformation rules.
D: props.confis the correct answer because, although it is commonly used, it is not a mandatory part of every deployment app. An app may not need data parsing configurations, and thus, props.conf might not be present in some apps.
Splunk Documentation References:
* Building Splunk Apps
* Deployment Apps
This confirms thatprops.confis not a required part of a deployment app, making it the correct answer.
NEW QUESTION # 33
Which of the following are valid settings for file and directory monitor inputs?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
In Splunk, when configuring file and directory monitor inputs, several settings are available that control how data is indexed and processed. These settings are defined in the inputs.conf file. Among the given options:
* host:Specifies the hostname associated with the data. It can be set to a static value, or dynamically assigned using settings like host_regex or host_segment.
* index:Specifies the index where the data will be stored.
* sourcetype:Defines the data type, which helps Splunk to correctly parse and process the data.
* TCP_Routing:Used to route data to specific indexers in a distributed environment based on TCP routing rules.
* host_regex:Allows you to extract the host from the path or filename using a regular expression.
* host_segment:Identifies the segment of the directory structure (path) to use as the host.
Given the options:
* Option Bis correct because it includes host, index, sourcetype, TCP_Routing, host_regex, and host_segment. These are all valid settings for file and directory monitor inputs in Splunk.
Splunk Documentation References:
* Monitor Inputs (inputs.conf)
* Host Setting in Inputs
* TCP Routing in Inputs
By referring to the Splunk documentation on configuring inputs, it's clear that Option B aligns with the valid settings used for file and directory monitoring, making it the correct choice.
NEW QUESTION # 34
What is the name of the Splunk Cloud feature that allows you to perform self-service administrative tasks such as creating indexes, inputs, and roles?
- A. Admin Toolkit
- B. Admin Dashboard
- C. Admin Console
- D. Admin Config Service
Answer: D
NEW QUESTION # 35
What are the four default roles that Splunk Cloud Platform comes with?
- A. admin, power, user, can_delete
- B. admin, power, user, guest
- C. admin, power, user, sc_admin
- D. admin, power, user, can_write
Answer: C
NEW QUESTION # 36
Which command can be used to install a universal forwarder on a Linux system?
- A. splunk enable boot-start
- B. splunk forwarder install
- C. splunk add forward-server
- D. splunk install forwarder
Answer: D
NEW QUESTION # 37
What is the name of the Splunk Cloud feature that allows you to monitor and manage resource utilization by business units and users using a Splunk app?
- A. Splunk App for Resource Management
- B. Splunk App for Usage Analytics
- C. Splunk App for Cost Optimization
- D. Splunk App for Chargeback
Answer: D
NEW QUESTION # 38
A customer wants to mask unstructured data before sending it to Splunk Cloud. Where should SEBCMD be configured for this?
- A. props.conf on a Heavy Forwarder.
- B. transforms, cent on a Splunk Cloud indexer.
- C. props. conf on a Splunk Cloud search head,
- D. props. conf- on a Universal Forwarder.
Answer: A
Explanation:
To mask unstructured data before sending it to Splunk Cloud, the SEDCMD should be configured in the props.
conf file on a Heavy Forwarder. The Heavy Forwarder is responsible for data parsing and transformation before forwarding the data to Splunk Cloud. This ensures that sensitive data is masked before it reaches the indexing stage.
Splunk Documentation Reference: Using SEDCMD to Mask Data
NEW QUESTION # 39
Which type of forwarder is a full Splunk Enterprise instance that can run apps and add-ons?
- A. Heavy forwarder
- B. Universal forwarder
- C. Search head
- D. Deployment server
Answer: A
NEW QUESTION # 40
Which option can be used to specify the source type of the data when creating a file or directory monitor input?
- A. Select Source Type
- B. Define Source Type
- C. Set Source Type
- D. Choose Source Type
Answer: C
NEW QUESTION # 41
......
Splunk SPLK-1005 certification validates an individual's ability to deploy, configure, and manage Splunk Cloud environments. Splunk Cloud Certified Admin certification is recognized globally and can help IT professionals enhance their career prospects. It is also an excellent way to demonstrate to potential employers that you have the necessary skills and knowledge to manage Splunk Cloud infrastructure effectively.
SPLK-1005 Study Guide Brilliant SPLK-1005 Exam Dumps PDF: https://actualtorrent.realvce.com/SPLK-1005-VCE-file.html