[Q22-Q45] Attested DES-1221 Dumps PDF Resource [2022]

Share

Attested DES-1221 Dumps PDF Resource [2022]

Latest DES-1221 Actual Free Exam Questions Updated 62 Questions


The benefit in Obtaining the Specialist – Implementation Engineer, PowerStore Solutions Version 1.0

Getting this certification can:

  • Increase your confidence and build credibility
  • Move from individual contributor to strategic technology advisor in your organization
  • Take advantage of exclusive benefits aimed to make your job easier
  • Differentiate yourself in a market clamoring for skilled professionals
  • Boost your productivity (and your free time in the process)

 

NEW QUESTION 22
An administrator receives an alert on a PowerStore Cluster with three appliances:
The appliance A1 is projected to run out of space in 8 days
Capacity utilization is above 90 percent
Which tools are available to assist the Administrator with a potential resolution?

  • A. Space reclamation wizard
  • B. Assisted Migration
  • C. System Optimization
  • D. Thin provision conversion wizard

Answer: B

Explanation:
Explanation/Reference:
Reference: https://volumes.blog/2020/05/18/what-is-powerstore-part-11-resource-balancer/

 

NEW QUESTION 23
What does a Storage Administrator need to consider about Resource Balance when assigning volumes?

  • A. Whether the appliance is offline
    Appliance failure status
    Capacity utilization
  • B. Whether the Cluster is offline
    Node failure status
    I/O utilization
  • C. Whether the Node is offline
    Appliance failure status
    Node utilization
  • D. Whether the appliance is online
    Appliance failure status
    Cluster utilization

Answer: A

Explanation:
Explanation/Reference: https://volumes.blog/2020/05/18/what-is-powerstore-part-11-resource-balancer/

 

NEW QUESTION 24
Match the correct Base Enclosure port in column A to the Expansion Enclosure port in column B to show the correct cabling for adding a single expansion enclosure to a base enclosure.

Answer:

Explanation:

Reference:
https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-isg/cable-the-base-enclosure-to-the-expansion-enclosure?guid=guid-d68d049f-2b77-489f-b1ab-553f4f3de8aa&lang=en-us

 

NEW QUESTION 25
Use the simulator to determine how many logical ports are currently marked for replication on the PowerStore appliance.
Note: It is necessary to close (x) the simulator window before you can select a response to this question.
Simulator:









  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

 

NEW QUESTION 26
What is the total number of NVRAM devices used in PowerStore 3000?

  • A. Up to 21
  • B. 0
  • C. 1
  • D. Up to 6

Answer: C

Explanation:
Explanation/Reference: https://volumes.blog/2020/05/05/whats-is-powerstore-part-2-hardware/#:~:text=On%20the%
20PowerStore%201000%20and,(2)%20NVMe%20NVRAM%20devices.&text=PowerStore%20supports%
20four%20types%20of,in%20specific%20locations%20and%20enclosures.

 

NEW QUESTION 27
What is a way to verify the data path connectivity between a source VNX2 storage system and the PowerStore system when configuring an import session?

  • A. Verify host initiators on PowerStore Manager
  • B. Review Server Manager MPIO properties
  • C. Use the VNX2 SP ping operation
  • D. Examine Fibre Channel zoning

Answer: C

 

NEW QUESTION 28
While configuring a Dell switch with PowerStore, what are the recommended license outputs from a show license status command?

  • A. Status: Term-Based, Type: Unlimited
  • B. Type: Perpetual, Status: Active
  • C. Status: Perpetual, Type: Open
  • D. Type: Term-Based, Status: Active

Answer: B

Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-cfg/validate-the-top-of- rack-tor-switch-versions-and-licensing?guid=guid-40c30b91-7fb2-4a26-bac7-4ae67c07bdfb&lang=en-us

 

NEW QUESTION 29
What is a way to verify the data path connectivity between a source VNX2 storage system and the PowerStore system when configuring an import session?

  • A. Review Server Manager MPIO properties
  • B. Verify host initiators on PowerStore Manager
  • C. Use the VNX2 SP ping operation
  • D. Examine Fibre Channel zoning

Answer: A

 

NEW QUESTION 30
An administrator has performed the Cutover operation for an import session from a VNX2 source storage system.
What is a result of the operation?

  • A. Host is removed from the VNX2 Storage Group
  • B. Storage Group containing the imported LUN is deleted
  • C. Imported LUN is deleted from the VNX2
  • D. Imported LUN is removed from the VNX2 Storage Group

Answer: D

 

NEW QUESTION 31
You are a network administrator that needs to setup a Data switch model S5248F-ON to be used for PowerStore 7000T system Use the Simulator to:
1) Check the OS version and license status.
2) Set management IP address 172.17.57.10 subnet as 255.255.255.0 on chassis = 1, slot = 1, port = 10
3) Enable the port
4) Configure default route with gateway 192.168.1.254, NTP server 192.168.1.50
5) Enable RSTP with priority 4096
6) Commit and exit.

Answer:

Explanation:
check the answer below in explanation.
Explanation
Below are the exhibits solution for this simulation.

 

NEW QUESTION 32
In a PowerStore T source cluster, create a 100GB volume with name "Prod_vol" and set a protection policy to replicate the volume with RPO 30 minutes to a destination cluster. The destination cluster is already configured. When you have finished using the simulator, click Next.

Answer:

Explanation:
Below are the exhibits solution for this simulation.















 

NEW QUESTION 33
A storage administrator has provisioned a 50GB volume and presented it to an application. The application owner has requested that the volume be replicated to a secondary array. Which policy should be assigned to the volume to enable replication?

  • A. Replication
  • B. Performance
  • C. Protection
  • D. Remote

Answer: C

 

NEW QUESTION 34
What is the final configuration step when installing the ImportKit for a Windows host accessing VNX2 storage?

  • A. Select the RSA key for configuring the control path HTTPS certificate
  • B. Configure the network port and interface for the host data path
  • C. Configure the network port and interface for the management control path
  • D. Select the folder location on the host for the program installation

Answer: C

 

NEW QUESTION 35
A VM administrator uses their PowerStore user account and noticed they are unable to change their password.
Why?

  • A. Extended schema for Unix users in Active Directory not set
  • B. Validate user in Active Directory not set
  • C. In settings > users: enable allow user to change password not set
  • D. VM Administrator role cannot set password

Answer: C

 

NEW QUESTION 36
How is the VASA provider registered with vSphere when connecting to a PowerStore X system?

  • A. Manually added from vCenter server using add storage provider option
  • B. VASA is unsupported in PowerStore X models
  • C. Automatically added during Initial Configuration
  • D. Built into the PowerStore X system code

Answer: A

Explanation:
Explanation/Reference: https://www.delltechnologies.com/en-ca/collaterals/unauth/white-papers/products/storage/ h18116-dell-emc-powerstore-vmware-vsphere-best-practices.pdf (17)

 

NEW QUESTION 37
What does the data import session Pause operation do?

  • A. Stops the source to PowerStore background copy operation
  • B. Deactivates the host to PowerStore control path
  • C. Deactivates the host to PowerStore data path
  • D. Stops the source to PowerStore cutover operation

Answer: A

 

NEW QUESTION 38
A storage administrator has provisioned a 50GB volume and presented it to an application. The application owner has requested that the volume be replicated to a secondary array. Which policy should be assigned to the volume to enable replication?

  • A. Replication
  • B. Protection
  • C. Performance
  • D. Remote

Answer: A

 

NEW QUESTION 39
What is the total number of NVRAM devices used in PowerStore 3000?

  • A. Up to 21
  • B. 0
  • C. 1
  • D. Up to 6

Answer: C

 

NEW QUESTION 40
An administrator received the following alert from PowerStore regarding a previously created NAS server?
Description:
The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.
Which setting should the administrator change?

  • A. NTP
  • B. UDS
  • C. NIS
  • D. LDAP

Answer: A

 

NEW QUESTION 41
Which API does PowerStore use to communicate with ESXi server during vVols provisioning operation?

  • A. VAAI
  • B. SOAP
  • C. REST
  • D. VASA

Answer: D

Explanation:
VASA is a VMware-defined API meant to provide a common way for VMware to integrate with storage vendors. The API is implemented using an out-of-band, Simple Object Access Protocol (SOAP) over HTTPS.

 

NEW QUESTION 42
When planning rack layout, why should base enclosures be grouped together?

  • A. Power distribution requirements
  • B. Hot aisle requirement
  • C. Ease of cable management
  • D. Rack weight balance

Answer: C

 

NEW QUESTION 43
What describes the process used in the Import External Storage migration architecture?

  • A. Orchestrator on PowerStore communicates over the control path to the host plugin and controls the multipathing active path to storage
  • B. Plugin on PowerStore communicates over the data path to orchestrator on the host and controls the multipathing active path to storage
  • C. Orchestrator on PowerStore communicates over the data path to the host plugin and controls the multipathing active path to storage
  • D. Plugin on PowerStore communicates over the control path to orchestrator on the host and controls the multipathing active path to storage

Answer: B

Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external- storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5

 

NEW QUESTION 44
A customer is new to PowerStore and asks if there are any differences between the A and B back-end ports.
What is the correct response?

  • A. "A" ports are output ports and "B" ports are input ports
  • B. All ports on the base enclosure are input ports
  • C. "A" ports are input ports and "B" ports are output ports
  • D. All ports on the base enclosure are output ports

Answer: C

 

NEW QUESTION 45
......


Understanding functional and technical aspects of Specialist – Implementation Engineer, PowerStore Solutions Version 1.0 PowerStore Software and Hardware upgrades (7%)

The following will be discussed in DELL DES-1221 dumps:

  • Describe and perform PowerStore software upgrade
  • Add an expansion shelve to a PowerStore appliance
  • Add drives to a PowerStore appliance
  • Add an appliance into a cluster

 

DES-1221 Certification Overview Latest DES-1221 PDF Dumps: https://actualtorrent.realvce.com/DES-1221-VCE-file.html